overclock e8000 prima volta

[jaab90]

ciao ragazzi vorrei overclockare la mia cpu fino a 3,7-3,8 ghz
tuttavia non ho mai overclockato in vita mia......ho bisogno del vostro aiuto
ps: sarei in tenzionato ad utilizzare l'utility AI suite di ASUS...voi che ne dite?

specifivhe tecniche:

-------------------------
CPU-Z version 1.50
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 2

Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Core 2 Duo E8500
Codename Wolfdale
Specification Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz
Package Socket 775 LGA (platform ID = 0h)
CPUID 6.7.6
Extended CPUID 6.17
Core Stepping C0
Technology 45 nm
Core Speed 3172.6 MHz (9.5 x 334.0 MHz)
Rated Bus speed 1335.8 MHz
Stock frequency 3166 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.5x
max VID 1.225 V
Features XD, VT


Thread dumps
------------------------------------------------------------------------------------

CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01008001h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h

Cache descriptor Level 1 D 32 KB 1 thread(s)
Cache descriptor Level 1 I 32 KB 1 thread(s)
Cache descriptor Level 2 U 6 MB 2 thread(s)

MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0x000000E8 edx = 0x00000847 eax = 0xE116C9A8
MSR 0x00000017 edx = 0x04000000 eax = 0x8884C920
MSR 0x000000CD edx = 0x00000000 eax = 0x00000804
MSR 0x0000003F edx = 0x00000000 eax = 0x00000000
MSR 0x000000CE edx = 0x00154920 eax = 0x14140713
MSR 0x000001A0 edx = 0x00000040 eax = 0x62972489
MSR 0x000000EE edx = 0x00000000 eax = 0x867D1300
MSR 0x0000011E edx = 0x00000000 eax = 0xBE702111
MSR 0x0000019C edx = 0x00000000 eax = 0x88310000
MSR 0x00000198 edx = 0x06154920 eax = 0x06004920
MSR 0x00000199 edx = 0x00000000 eax = 0x00004920

CPU Thread 1
APIC ID 1
Topology Processor ID 0, Core ID 1, Thread ID 0
Type 01008001h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h

Cache descriptor Level 1 D 32 KB 1 thread(s)
Cache descriptor Level 1 I 32 KB 1 thread(s)
Cache descriptor Level 2 U 6 MB 2 thread(s)

Chipset
------------------------------------------------------------------------------

Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual (Symmetric)
Memory Frequency 400.7 MHz (5:6)
CAS# 5.0
RAS# to CAS# 5
RAS# Precharge 5
Cycle Time (tRAS) 18
Command Rate 2T

DIMM #1

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X2048-8500C5D

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no

Timings table
Frequency (MHz) 270 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 13 18
TRC 16 23

EPP profile 1 (full)
Voltage level 2.100 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 22 clocks (41.00 ns)
tWR 8 clocks (15.00 ns)


DIMM #2

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X2048-8500C5D

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no

Timings table
Frequency (MHz) 270 400
CAS# 4.0 5.0
RAS# to CAS# delay 4 5
RAS# Precharge 4 5
TRAS 13 18
TRC 16 23

EPP profile 1 (full)
Voltage level 2.100 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 22 clocks (41.00 ns)
tWR 8 clocks (15.00 ns)


Dump Module #1
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00
10 0C 08 30 03 02 00 03 37 50 00 00 32 1E 32 2D 01
20 17 25 05 12 3C 1E 1E 00 06 39 7F 80 14 1E 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 0D
40 7F 7F 9E 00 00 00 00 00 01 43 4D 32 58 32 30 34
50 38 2D 38 35 30 30 43 35 44 20 20 20 20 00 00 00
60 00 00 00 6D 56 4E B1 21 FF FF FF FF FF FF FF FF
70 FF FF FF FF 8C 50 01 20 25 1E 20 25 25 1C 3C 29
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Dump Module #2
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00
10 0C 08 30 03 02 00 03 37 50 00 00 32 1E 32 2D 01
20 17 25 05 12 3C 1E 1E 00 06 39 7F 80 14 1E 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 0D
40 7F 7F 9E 00 00 00 00 00 01 43 4D 32 58 32 30 34
50 38 2D 38 35 30 30 43 35 44 20 20 20 20 00 00 00
60 00 00 00 6D 56 4E B1 21 FF FF FF FF FF FF FF FF
70 FF FF FF FF 8C 50 01 20 25 1E 20 25 25 1C 3C 29
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Monitoring
------------------------------------------------------------------------------

Mainboard Model P5K PRO (0x1E1 - 0x57EA8F)

LPCIO
-----------------------------------------------------
Vendor Winbond
Model W83627DHG
Vendor ID 0x5CA3
Chip ID 0xA0
Revision ID 0x23
Config Mode I/O address 0x2E

Hardware monitor
-----------------------------------------------------

Winbond W83627DHG hardware monitor

Voltage sensor 0 1.20 Volts [0x96] (CPU VCORE)
Voltage sensor 1 11.93 Volts [0xD6] (+12V)
Voltage sensor 2 3.26 Volts [0xCC] (AVCC)
Voltage sensor 3 3.26 Volts [0xCC] (+3.3V)
Voltage sensor 4 1.42 Volts [0xB1] (VIN1)
Voltage sensor 5 5.11 Volts [0xD5] (+5V)
Voltage sensor 6 1.44 Volts [0xB4] (VIN3)
Temperature sensor 0 43°C (109°F) [0x2B] (SYSTIN)
Temperature sensor 1 42°C (107°F) [0x54] (CPUTIN)
Temperature sensor 2 15°C (58°F) [0x1D] (AUXTIN)
Fan sensor 1 2220 RPM [0x98] (CPUFANIN0)
Fan sensor 2 2722 RPM [0x1F] (AUXFANIN0)

Dump hardware monitor
LPC Register space, base address = 0x0290

Hardware monitor
-----------------------------------------------------

Analog Device ADP3228 hardware monitor

Current sensor 0 15.27 Amps [0x76] (CPU)

Dump hardware monitor
SMBus Register space, base address = 0x0400
SMBus request at channel 0x0, address 0x20

Hardware monitor
-----------------------------------------------------

Intel Core 2 Duo E8500 hardware monitor

Temperature sensor 0 51°C (123°F) [0x31] (Core #0)
Temperature sensor 1 45°C (112°F) [0x37] (Core #1)

grazie in anticipo

[Ellyk0]

Per arrivare a quella frequenza ti sconsiglio vivamente di usare i software. Vai da bios. Leggiti la guida sull'oc. Inizia a navigare nel bios per farti un'idea di che voci ci sono.
Comunque ti consiglio di iniziare a settere il fsb a 400 invece che 333
Riporti in specifica le ram (salgono automaticamente all'aumentare del fsb)
imposti un vcore sui 1,2 o 1,25 (dipende dal vid che hai... lo vedi con core temp)

tutto il resto lo puoi mantenere in auto.

[jaab90]

grazie per la risposta...:-)
se alzo il fsb a 400 lasciando inalterata qualsiasi altra impostazione rischio di danneggiare il pc?

[Ellyk0]

il vcore in auto è pericoloso... lo alza un casino.
imposta solo molti fsb 400 dram 800
vcore su 1,2 e il resto in auto... se non si avvia dagli più vcore