Avvio lunghissimo ubuntu 18.04 su ssd

bmarco

Utente Attivo
265
5
Ciao a tutti. Ho installato da qualche mese ubuntu 18.04 su ssd samsung 850 evo alla quale ho affiancato un hard disk WD red da 1 Tb solo per i dati formattato in ext4. Preciso che l'ssd è stato formattato in MBR e non quindi con installazione in modalità UEFI.
Fino a pochi giorni fa tutto ok, monta l'hard disk all'avvio e ubuntu si avvia quasi immediatamente. L'altro giorno avvio ubuntu e si ferma su schermata viola con ubuntu ed i puntini bianchi bloccati e solo dopo 1 minuto appare il puntatore del mouse e funziona tutto. Successivamente gli avvii sono stati regolari. Oggi a pc spento ma con interruttore dell'alimentatore in on ho staccato l'hard disk dal connettore sata e dati ed ho avviato il pc per capire se il rumore che proveniva dal case fosse causa dell'hard disk oppure di una ventola (rumore leggerissimo ma volevo sapere se era la ventola o meno). All'avvio di Ubuntu 18.04 si riblocca con Ubuntu e puntini bianchi. A questo punto premo CTRL ALT CANC e riavvio. Appare una schermata viola dove chiede che cosa selezionare. Ho fatto appena in tempo a verificare qualcosa di quello che c'era scritto: GNU GRUB come titolo e poi sotto Ubuntu, Memory test, ma dopo poco si è riavviato da solo. Ho spento il pc nuovamente, collegato l'hard disk e po spento. Di nuovo acceso il pc: prima di ottenere un avvio rapido come prima ho dovuto riavvire 6 volte, si piantava come prima e mostrava regolarmente il desktop anche dopo 1 munuto/2 minuti. Ora è il secondo avvio che avviene regolarmente. Seconodo voi che cosa è successo?
Grazie.
 
Ultima modifica:

pabloski

Utente Èlite
2,868
916
E' successo che il filesystem sull'HD era danneggiato e il sistema ha avviato fsck all'avvio. Fsck ovviamente richiede un bel pò di tempo su un HD meccanico ed ecco spiegato il perchè della lentezza.
 

EmanueleC

Utente Èlite
5,630
1,838
CPU
Ryzen 5 2600x
Dissipatore
stock
Scheda Madre
ROG STRIX B450-F GAMING
HDD
OS: WD BLue SN570 500GB, Dati: 1TB Toshiba p300, Game: 2TB Toshiba P300
RAM
Corsair DDR4 3000 Mhz 2x8 GB
GPU
AMD Radeon RX 6600
PSU
Seasonic Focus Gold 450W
Case
BitFenix Neos
OS
Fedora Linux
Ciao a tutti. Ho installato da qualche mese ubuntu 18.04 su ssd samsung 850 evo alla quale ho affiancato un hard disk WD red da 1 Tb solo per i dati formattato in ext4. Preciso che l'ssd è stato formattato in MBR e non quindi con installazione in modalità UEFI.
Fino a pochi giorni fa tutto ok, monta l'hard disk all'avvio e ubuntu si avvia quasi immediatamente. L'altro giorno avvio ubuntu e si ferma su schermata viola con ubuntu ed i puntini bianchi bloccati e solo dopo 1 minuto appare il puntatore del mouse e funziona tutto. Successivamente gli avvii sono stati regolari. Oggi a pc spento ma con interruttore dell'alimentatore in on ho staccato l'hard disk dal connettore sata e dati ed ho avviato il pc per capire se il rumore che proveniva dal case fosse causa dell'hard disk oppure di una ventola (rumore leggerissimo ma volevo sapere se era la ventola o meno). All'avvio di Ubuntu 18.04 si riblocca con Ubuntu e puntini bianchi. A questo punto premo CTRL ALT CANC e riavvio. Appare una schermata viola dove chiede che cosa selezionare. Ho fatto appena in tempo a verificare qualcosa di quello che c'era scritto: GNU GRUB come titolo e poi sotto Ubuntu, Memory test, ma dopo poco si è riavviato da solo. Ho spento il pc nuovamente, collegato l'hard disk e po spento. Di nuovo acceso il pc: prima di ottenere un avvio rapido come prima ho dovuto riavvire 6 volte, si piantava come prima e mostrava regolarmente il desktop anche dopo 1 munuto/2 minuti. Ora è il secondo avvio che avviene regolarmente. Seconodo voi che cosa è successo?
Grazie.
Posta il risultato di questo comando:
Codice:
systemd-analyze critical-chain
 

bmarco

Utente Attivo
265
5
Ecco il risultato:

Codice:
marco@marcopc:~$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23
























The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
lines 1-23...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
                                      └─system.slice @116ms
lines 1-24...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
                                      └─system.slice @116ms
                                        └─-.slice @114ms
lines 1-25...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @21.423s
└─multi-user.target @21.423s
  └─hddtemp.service @10.106s +17ms
    └─network-online.target @10.106s
      └─NetworkManager-wait-online.service @1.386s +8.719s
        └─NetworkManager.service @1.167s +217ms
          └─dbus.service @1.127s
            └─basic.target @1.126s
              └─sockets.target @1.126s
                └─snapd.socket @1.124s +1ms
                  └─sysinit.target @1.122s
                    └─systemd-timesyncd.service @1.018s +103ms
                      └─systemd-tmpfiles-setup.service @985ms +29ms
                        └─local-fs.target @985ms
                          └─run-user-1000-gvfs.mount @2.272s
                            └─run-user-1000.mount @1.508s
                              └─swap.target @239ms
                                └─swapfile.swap @140ms +93ms
                                  └─systemd-remount-fs.service @124ms +6ms
                                    └─systemd-journald.socket @116ms
                                      └─system.slice @116ms
                                        └─-.slice @114ms
~
marco@marcopc:~$

Domanda: come si fa a danneggiare un file system su un hd per il semplice fatto di staccarlo a pc spento e poi riavviando con la sola ssd e poi spegnendo il pc e ricollegando l'hard disk?
 

« MoMy »

Utente Èlite
1,520
757
Se l' analyze che leggiamo non è quello dell' avvio lungo, non serve a molto, a parte il solito networkmanager che ''è più lungo dell' anno della fame''.
 

bmarco

Utente Attivo
265
5
Confermo, non è relativo all'avvio lungo ma all'ultimo avvio regolare e veloce.
MoMy, mi stai dicendo che è normale tale lunghezza del networkmanager?
 

EmanueleC

Utente Èlite
5,630
1,838
CPU
Ryzen 5 2600x
Dissipatore
stock
Scheda Madre
ROG STRIX B450-F GAMING
HDD
OS: WD BLue SN570 500GB, Dati: 1TB Toshiba p300, Game: 2TB Toshiba P300
RAM
Corsair DDR4 3000 Mhz 2x8 GB
GPU
AMD Radeon RX 6600
PSU
Seasonic Focus Gold 450W
Case
BitFenix Neos
OS
Fedora Linux
Confermo, non è relativo all'avvio lungo ma all'ultimo avvio regolare e veloce.
MoMy, mi stai dicendo che è normale tale lunghezza del networkmanager?
Infatti va fatto dopo l'avvio lungo, non se hai un avvio regolare.
 

bmarco

Utente Attivo
265
5
Potrei smontare l'hard disk

Codice:
umount /dev/sdb1

poi digitare questo:

Codice:
fsck -y /dev/sdb1

che se non mi sbaglio farebbe le correzioni in automatico.

Posso farlo tranquillamente vero, male non fa?
 

pabloski

Utente Èlite
2,868
916
Domanda: come si fa a danneggiare un file system su un hd per il semplice fatto di staccarlo a pc spento e poi riavviando con la sola ssd e poi spegnendo il pc e ricollegando l'hard disk?

Penso sia successo prima, quando era in uso. Da lì, siccome hai riavviato, non ha terminato varie volte fsck e quindi ad ogni riavvio cercava di completarlo. Infatti dopo un certo numero di riavvii è ritornato a posto.
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
7,419
3,191
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
che kernel hai al momento ?
 

centoventicinque

Moderatore
Staff Forum
Utente Èlite
7,419
3,191
CPU
Intel core I5 4950/ i5 3550
Dissipatore
coolermaster Mod Anonima sequestri
Scheda Madre
anonima sequestri/ p8z77le
HDD
crucial bx500 480GB+raid0 wd blue 500GB / 8Xwd red 2TB[9420I+4X seagate 2TB [intel] 2x850 pro 256GB
RAM
16GB ddr3 1600 / 16 GB ddr3 hyperx
GPU
gtx660TI 3GB / gtx 1080 TI
Audio
Azila
Monitor
40" 4k LG / asus 27"
PSU
cm masterwatt 650 / microstar 750W
Case
anonimo itek/rack 2U
OS
archlinux X68_66
cambia gdm con lightdm, mentre parte muovi il mouse, è un bug
 

Entra

oppure Accedi utilizzando
Discord Ufficiale Entra ora!

Discussioni Simili